ART PIPES Install DIY??
 

I've searched the DIY and I can not find a DIY for this. If there is, can you please point me in that direction,

Thanks in advance

If you still have the stock cats?

Look in here and be warned about the famous demon bolts.

http://www.the370z.com/intake-exhaus...mon-bolts.html

There really isn't a DIY since it pretty straight forward.

I suggest carefully removing your stock or aftermarket intakes so you have plenty of room to see where you're attaching the socket with looooooong extensions.

Carefully remove the o2 sensors, cats brace, intakes, loosen the front demon bolts and rear bolts.

Have FUN!

There is a DIY for high flow cats. Just use it as your guide.

I was installing art pipes few weeks ago and non of the DIY says that that is more easier to remove air intake on both side to get those pain a butt bolts that installed in reverse on oem cats. Save your self lots of time by removing intakes and using long extension to get them with the air gun from the top. Good luck!