Originally Posted by dts3 (Post 3806750)

Nice write-up, thanks for that :)

Bonus points for the longest disclaimer that I've ever read in a forum post.

Originally Posted by VABAM (Post 3806759)

:icon18:

Considering how many people I’ve helped correct their wiring the disclaimer was a good idea. Couple of them were stupid lucky they didn’t short something out. :icon14:

Originally Posted by radensb (Post 3764793)

Got it! Thanks!



There is another option that I have been playing with, but it is still in its infancy. It involves using a microcontroller and some code to communicate on the CAN Bus. There is a very nice install that is demonstrated in this video which shows an Android app overlayed on the screen that provides the AC controls.

The above install requires an Arduino programmed to communicate to an MCP2515 CAN to SPI interface. The firmware project is here and the Android app project is here. Currently, the niscan project only works for the 370Z (:tup:) but can be modified to support other vehicles.

Going this route, you can keep the CAN based AC amp and use the above firmware project to mimic the CAN based AC controls. This eliminates a bunch of splicing and opens the options for custom mechanical controls. I believe that this will lead to much more flexibility in custom moves away from the stock Navi. My only concern is if playing with the CAN Bus and potential corrupting traffic needed to properly operate the vehicle. Perhaps this isn't something to be worried about. I am still wrapping my head around the technical details and going over the code.