Nissan 370Z Forum - Clay bar, I was a bit sceptical at first.

Page 2 of 2

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Detailing / Washing / Waxing / Cosmetic Maintenance and Repair (http://www.the370z.com/detailing-washing-waxing-cosmetic-maintenance-repair/)

- - Clay bar, I was a bit sceptical at first. (http://www.the370z.com/detailing-washing-waxing-cosmetic-maintenance-repair/72396-clay-bar-i-bit-sceptical-first.html)

boarderbob

06-11-2013 09:55 AM

I love the feeling of clean paint after a good clay.

NS370Z

06-11-2013 12:23 PM

Quote:

Originally Posted by synolimit (Post 2355266)

I didn't see it and wanted to make something a little clear...you must wax after clay baring since you will have zero protection left besides the clear coat. and you don't want to wax later because then you'll need to clay bar again or you'll be waxing over things stuck in the clear coat.

Got that covered. It's inside my garage under a super plush Sparco indoor cover until this weekend when I'll put some Machine Super Sealant, Glaze then top off with Americana wax. My garage is very good with particulate and with the cover it should be fine.:ughdance:

NS370Z

06-11-2013 12:25 PM

Quote:

Originally Posted by boarderbob (Post 2357842)

I love the feeling of clean paint after a good clay.

I know, I was just amazed at how much smoother it made the surface. Even after a real good washing there is just some gunk you can't remove. I was super careful to knead the clay often. :tup:

NS370Z

06-15-2013 11:53 PM

Quote:

Originally Posted by cv129 (Post 2355196)

Why not the nanoskin autoscrub? Save time better result?

Never heard of it but since you mentioned it I went and did a bit of research on it and decided to buy the 6" Fine pad and 2 bottles of the Glide stuff. General consensus is it is a good product. A bit pricey so I hope it is all that. I'll practice on my 08 Mazda 3 to perfect technique.:tup: Thanks

All times are GMT -5. The time now is 11:40 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page