For Sale ; Complete Custom 3.5'' Exhaust
 

Updated info about the complete N/A Package Deal on post # 2

I'm wondering if anybody could be seriously interested into my custom exhaust. ;)


the kit include the whole exhaust setup which is;

- Modified Momentum headers (not the z1 copy)
- Custom Y-Pipe 2.5'' paired with a transition & megaphone to 3.5'' single exit.
- Custom 3.5'' mid pipe with a 18'' resonator.
- Custom Muffler section 3.5'' in & out.
- 2x HFC (y-pipe)
- 2x Resonator (y-pipe)
- Custom rear holding bracket (with bolts)
- All mandrel bent 304SS tubing.
- TIG Welded and Back-Purged for improved stronger welds.
- Equipped with modified V-bands to reduce turbulence.
- No gasket required.
- Much improved scavenging effect due to the both transition and megaphone *Header & Y-Pipe* which mean more power !
- With the benefit of V-Band the swap of those parts can be done in 10 mins ! (either 2x resonator or 2x HFC)

you will have an improved ground clearance since everything was installed to be as close as possible to the frame.

as a bonus half of the exhaust were heat wraped with DEI titanium (100feets of it)


serious buyer only please.

Sorry I do not have a VQ37VHR (VVEL) dyno. since I have the HR heads now.
IMO this is the best ALL-OUT exhaust setup on the 370z.

If the following parts are installed
- Stillen Gen 3 CAI
- VHR intake manifold (with intake runner smoothed out)
- my custom Throttle body
- Uprev / EcuTek

I predict it will outperform the Z1 setup that had a result of 342whp with one of our 370z member on their dynojet.


My guess is by over 10whp from what I already gained previously from stock to fully modded
256whp to 324whp = 68whp of gain *With Sasha's Dyno now OnPointDyno.com* with my previous less optimized exhaust & HR intake manifold

when Z1 only got a gain from stock to fully modded including their secret mod to 62whp of gain ( from 280 to 342 )


http://www.the370z.com/members/megan...7-39-6-lbs.jpg

http://www.the370z.com/members/megan...907-121955.jpg


Adding a transition and down tube since the throat area was a few tenth thousand under 2 1/4''ID
this help with the scavenging effect of the collector.

http://www.the370z.com/members/megan...enger-side.jpg


You will need to remove the rear bracing tower shown in the bottom Red square
http://www.the370z.com/members/megan...350z-under.jpg

then install the provided *blue* rear holding bracket
the 2 holding bolts goes into the already installed welded nut into the frame.
and you will lose the 2 braces going to the front bolts of the sub-frame.
IMO they arent crucial to the rear stability since the 350z does not have it and have the same sub-frame setup.
http://www.the370z.com/members/megan...re-exhaust.jpg

Ofcourse you will need to remove the rear fog light and slightly cut a circle in it ....
http://www.the370z.com/members/megan...dea-behind.jpg




Youtube video of the sweet noise ;)

Inside of the car.
with some 1500-7500rpm pull
cruising speed
and last a 4or 5th gear pull ( cant remember )



Video taken outside of the car by the road and doing a fly-by.



Loud and made for a true hardcore enthusiasm driver and/or racer.


most pictures of the exhaust built can be seen here ( click me )

Why am I selling ?
Going another route. and no im not selling the Z

Christmas's special price of 3000$

the kit is evaluated at 5000$ with my welding labour and initial installation on my part.

:merrychristmas:

Guess what...

Every N/A parts required to gain atleast a minimun of 70+ whp over stock is now for sale.
Remember I gained 68whp with a less effective exhaust that was made to fit into the decibel limit rules.

This custom 3.5'' exhaust is way more effective than my previous one.

It will be best to be sold as a kit since everything must match together to avoid bottle neck flow problems.

this include every parts that can be seen in this exhaust thread ( CLICK ME )

this package deal add the following parts ;

- Custom CAI which include a bigger Maf Tube
- Custom Throttle body
- NST Light weight pulley kit ( crank & alternator )
- Base Uprev ROM for this setup ( THIS IS NOT A LICENSE).
I just need your ECU part number and the tuned base ROM will be sent to you with the back to stock ROM. *This alone save your $$ on tuning time...*

this package deal price is set at ; 4750$

a little expensive for me but GLWS. if i had the funds ... cotdaymn that sounds good. I makes the GTHaus exhaust i have sound tame lol

New Price !!
I'm eating another big lost here !

*Exhaust Package*
2750$ picked up ! *Petawawa, Ontario*
or
3000$ Shipped to US/Canada *PayPal fee included*

Not going any lower !