Free Carbon Fiber Door Sills. One member who....
 

Free Carbon Fiber Door Sills.
For one member who can bring your 370Z to us for a couple of times.
(or maybe once here and we can go to you next time)


But you must have this radio. We need to pattern the surface for our next kit.:tup:

http://images.autotrader.com/scaler/..._A.562x421.jpg

Currently carry this one with Navigation, and 09 base model radio patterned.
http://www.sherwoodinnovations.com/P...161CF_M_02.JPG



Don't they look lovely? This can be yours at no charge. Just let us install it and take some pictures. :tiphat:
http://www.sherwoodinnovations.com/e...es/4158cf1.jpg
http://www.sherwoodinnovations.com/e...es/4158cf2.jpg


Once again, here are the requirements.
-Member's Z should have the radio pictured above. (Without navigation)
-Member who can come to us at 9am or 4:00pm Mon-Thurs least once. (I expect about an hour or less of work first day)
-We may come to you for the second day, but please no farther than 30min from the Pearson Airport area. It will take less time than the first day. (test fitting and adjustment if required)
-Your 370Z should be clean (in and out for photo shoot and installation) - hey you got a 370, it should be clean all the time :driving:
- When you come, we will install the door sill kit and take photos for our website use.


So, please let me know if you are able to help us.
Thank you!!!!

Love the door sills, they look great!!! Can't help you though! I have to bose radio :(

Also would love to help, I'm minutes from Pearson but I have the Nav package on my '09 :(.

Wow, complete failure.
There should be an image of the radio I am looking for, but it's not loading.

This is the radio I am looking for.
http://images.autotrader.com/scaler/..._A.562x421.jpg

The radio that comes standard in NON-navigation 2010 370Z in Canada. (US Touring model )

i never get the good deals in my area!!! lmao

This is my radio, and I have no nav, sent you a pm

Do those door stills work with the illuminates OEM stills or the standard OEM stills?

We patterned off of a standard OEM sill from the 40th Anniversary with a Silver Z logo.
Is the illuminated one different in size?
Was it optional or come with a specific trim?

Its an option in the US but here its something we need to buy extra and after the fact.

Not sure if its a different size but in Canada your not going to see many.


http://www.thezstore.com/store/graph...arge403232.jpg

the heck... mine looks better. :p ;)

http://www.the370z.com/members/kench...46-cf-sill.jpg

Did you use the carbon stills from about on the illuminated stills or did you use the carbon pattern sheet and cut to fit?

i made it out of 3M Di Noc... there is a big thread on this in the interior/exterior section.

Comparison between 3M Di Noc and Real Carbon Fiber :tup:
Di Noc is a good stuff, but you will see the difference.
http://www.sherwoodinnovations.com/e...es/4158cf3.jpg
http://www.sherwoodinnovations.com/e...es/4158cf4.jpg

PM sent, count me in.

Thanks for all your interests guys.
We found a member for the project. :)