They may be cheaper to buy these local from dealer if they have stock. I could be wrong though.

2015 Nismo Front Bumper
 

Hey guys,

I just did this conversion last week. Joe from Zspeed is the guy you want to get it from...

ZSpeed Performance
3868 Lightner Rd
Vandalia, Ohio 45377

Joe Allison
Phone: 937-506-7224
ZSpeed Performance Nissan Infiniti Specialist 240SX 300ZX 350Z G35 G37 370Z

He has all the parts you need, at a fair price:

FBM22-6GA0H Front bumper $387
62087-6GA0A MOULDING Red insert $25
62086-6GA0A MOULDING Red insert $25
62077-6GA0A MOULDING Vertical insert $9
62076-6GA0A MOULDING Vertical insert $9
62064-6GA0B PROTECTOR Fender liner filler $10
62064-6GA0A PROTECTOR Fender liner filler $10
62023-6GA0A Tow Hook Cover Piece $6
63844-6GA0A Liner Front Fender Drivers Side $49 (wrong part # here)
63844-6GA0A Liner Front Fender Passenger Side $49

I also went with the under shroud or splash shield...you don't need to, but you can then use ALL the connection points...fits absolutely perfect that way.

Best thing to do is have it shipped to a Kinekpoint (temporary shipping address) in Buffalo. Costs $6 and takes 5 min to setup. I used the "NY mailbox" one and it's less than 1km from the border.

Sunny at Simplex Auto Works will paint and install for $450, all in! He also hooked me up with some custom mesh work to replace the DRL's. I think it works well.

It's also worth mentioning, the 2015 Nismo front bumper is plug and play. The previous Nismo front bumpers are a lot more work and money!

Here is how mine looks...

http://www.the370z.com/members/make-...-new-black.jpg

http://www.the370z.com/members/make-...nother-one.jpg

http://www.the370z.com/members/make-...iew-mirror.jpg

http://www.the370z.com/members/make-...lacked-out.jpg

http://www.the370z.com/members/make-...razy-night.jpg

I'm in Etobicoke, let me know if anyone wants to see it in person!

I hope this post was helpful. I just joined to share this with people.

Cheers,

Brendan

Looks great! Did you check local prices for parts?

I called a couple local dealerships. Their pricing was reasonable, but they told me Nissan Canada does not carry/stock Nismo anymore. In which case I would have to wait for it to come from Japan, as they will not ship from the US.

Don't shoot the messenger, as I would not be surprised if this is not completely accurate. In any event, they did not have them in stock and was not about to wait.

I'm glad you dig it!

honestly 90-95% of the dealers and their employees will just lie to you, even if all it would take is them asking someone else who does know or better yet do your job and reSEARCH on your little computer to see what is available.

Also price is not set each dealer can make up their own pricing it seems. I shopped around to any dealer within an hour of me and got 5 quotes on the Nismo parts I was looking for.

I got lucky and ran into a local car enthusiast driving a nice VW, long story short he tells me he is the parts guy at a NISSAN! dealership not to far from me and he was more then willing to help out. He also gave me the best price possible :tup:

In the end I only got the '15 Nismo sides and rear going with older Nismo front :tup: can't wait to send it off to the body shop in next couple weeks

That should be interesting. Be sure to send me pics of the whip!

I highly recommend Sunny, if your are looking for a body shop.

So, not sure if anyone looked into this or not, since the 2014 base already has DRLs wouldn't you only need the bumper cover and DRLs, not all the electrical to do this? The bumper seems reasonable and found the DRLs on courtesy Nissan parts website for around $550 each, which with mounting hardware would be around $1500 combined.

from what I gather electrics are already there just need the actual LED's which are completely different than the 13+ model DRL's.

the bumper + inserts are reasonable in price it's the DRL's that will set you back. 1 of them is probably going to cost you the same price as the bumper + inserts :shakes head:

Unless you get CS or EVO-R DRLs.

or just photoshop them in right? :P

Kenchan kind of mod.

I just came across this thread again.
I'm doing pretty much all around conversion. Instead of the side skirts I got the side blades from Aerojacket and I got the duckbill spoiler as well. DRLs are from carbon signal.
Everything will be going for paint this week I hope and then is play time putting everything together.
Though I'm also modifying the headlights, lowering the car, spacers, tinting tails and everything red on the back, painting the roof, clear 3M for the front etc etc. So it will be at least 3 weeks until car is ready.
I'll share some pics here when I'm done with it. They only thing I wish I could get is wheels but the budget is out... completely dry.

http://uploads.tapatalk-cdn.com/2016...fae4d374e9.jpg

http://uploads.tapatalk-cdn.com/2016...10804accc9.jpg

Hi Guys, I'm a bit confused about the part 62086-6GA0A. They are plastic. Do they come in the nismo red or do they need to be painted? I am confused because on Z1, Z Speed, and a couple of Nissan dealership parts websites, they are shown as red. However, most Nissan dealership parts websites only provide black and white diagrams w/o any real description. Also, I called my local dealership and asked. He told me to hold on so he could check, so I assume he didn't really know. He came back and said they needed to be painted. For some reason, I don't believe him though. Anyone know the real answer??