Nissan 370Z Forum - SPL Front End link Problem

Page 3 of 3

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Brakes & Suspension (http://www.the370z.com/brakes-suspension/)

- - SPL Front End link Problem (http://www.the370z.com/brakes-suspension/93336-spl-front-end-link-problem.html)

Loges

04-17-2018 10:52 PM

Quote:

Originally Posted by Hotrodz (Post 3748208)

Thanks for the update as this is very timely for me as I am replacing my old spl endlinks in the next week. You have been reped!

Thanks! :tiphat:

B&W_Evader

04-18-2018 09:47 AM

Quote:

Originally Posted by Mitco39 (Post 2878845)

I am having the exact same issue. I actually made a post about this awhile back. Its driving me crazy but I dont think the stock endlinks are strong enough to handle the upgraded sway so I haven't put the stock ones back on.

http://www.the370z.com/brakes-suspen...tay-tight.html

Been running the stock end-links on my eibach sways for 6 years, no issue. Fronts squeak now and then but I just need to get in there and put some fresh grease on the bushings.

Elmo370z

08-03-2018 12:35 AM

Quote:

Originally Posted by 14BlackCherry (Post 2878782)

I know I haven't got any responds so hopefully these pics will help. Are these under pre-load?

http://i35.photobucket.com/albums/d1...psb1b7cd86.jpg

http://i35.photobucket.com/albums/d1...psbdceb0ec.jpg

http://i35.photobucket.com/albums/d1...ps47e0fc97.jpg

Any reason from these pic why the end links are clunking?

Thank you for any help.

HOw did you get your end links to align.

jchammond

08-03-2018 04:01 AM

Looking at the pictures; doesn’t seem the upper heim joints have room to work vs. the lower ends.
Yes a quality locknut w/proper thread pitch helps.
Have equal amounts of room in the heim’s to swivel a bit as needed without binding.
Sometimes a small spacer is required to allow more movement.

All times are GMT -5. The time now is 08:02 PM.

Page 3 of 3

Show 40 post(s) from this thread on one page