Nissan 370Z Forum
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Brakes & Suspension (http://www.the370z.com/brakes-suspension/)
-   -   GT Spec Chassis Braces [6-Point Front & 2-Point Rear] Installed on Nismo Review (http://www.the370z.com/brakes-suspension/74087-gt-spec-chassis-braces-6-point-front-2-point-rear-installed-nismo-review.html)

MacLean 12-17-2013 05:16 PM
Quote:
Originally Posted by Huck (Post 2592250)
Jcosta, I would like your opinion on something. Do you feel that these give almost as good of a handling performance boost as would a decent set of coilovers? I've been thinking about BCbrs but havent pulled the trigger yet. At roughly $200 cheaper do you think would perform similarly?

Zdayz 2014!!

Quote:
Originally Posted by fuct (Post 2614174)
im not Jcosta, but you will feel a bigger difference with coilovers way more than installing these braces. id def get the coilovers first!
:iagree: +1.... GTSPEC is good, but your just beefing up the chasis and making it stiffer.

cinellipro 12-27-2013 09:44 AM
I recently installed the rear lower brace, and will be purchasing the 6-point brace. My question is about the rivet system used at 2 mounting points. The instructions say to use an impact gun to get the rivet installed into the chassis mounting point. However, others reported not needing to use an impact gun. I don't have an impact gun. Has anyone had experience with this?

2SIC4U 01-22-2018 02:00 PM
SoulFunction
 
SoulFunction makes the same braces and look amazing. They also make other braces for the 370z as well as other cars. You can see my quick and easy install for the 4 point brace https://www.youtube.com/watch?v=Ld26f9s0rRw&t=2s and I'll be installing the 6 point mid brace soon with a video to follow. The rivet install comes with the required tool, you can use a socket with wrench (hold the tool in place) but will take you time to bolt the bolt/tool down that a impact gun will do faster with less man strength.

s2krazyyy 01-23-2018 12:30 AM
Quote:
Originally Posted by 2SIC4U (Post 3723870)
SoulFunction makes the same braces and look amazing. They also make other braces for the 370z as well as other cars. You can see my quick and easy install for the 4 point brace https://www.youtube.com/watch?v=Ld26f9s0rRw&t=2s and I'll be installing the 6 point mid brace soon with a video to follow. The rivet install comes with the required tool, you can use a socket with wrench (hold the tool in place) but will take you time to bolt the bolt/tool down that a impact gun will do faster with less man strength.
Ive been thinking about putting some of these braces on lately. Notice any performance differences with the 4 point brace after installed?


All times are GMT -5. The time now is 02:33 PM.
Page 3 of 3 12 3
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2