Nissan 370Z Forum
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)
-   Brakes & Suspension (http://www.the370z.com/brakes-suspension/)
-   -   Can you put nismo sways and springs on 370z 40th? (http://www.the370z.com/brakes-suspension/70982-can-you-put-nismo-sways-springs-370z-40th.html)

kenchan 06-28-2014 03:06 PM
fock check this site:

it states it includes new bushings if you buy the s-tune set.

Nismo JDM Factory Stabilizer Kit E4600-1EA00US - Nissan 370Z Z34

so i think you do need to buy nismo bushings even if you ran the oem nismo (black) bars.

phill7662 06-28-2014 06:00 PM
nismo s tune swaybars
 
1 Attachment(s)
I don,t know about Nismo oem fitment in place of standard sway bars. But the S-Tune kit doesn't come with new bushings. As can be seen in the following attachment.I can verify as I have them installed.
Attachment 90591

kenchan 06-28-2014 06:10 PM
Quote:
Originally Posted by phill7662 (Post 2878021)
I don,t know about Nismo oem fitment in place of standard sway bars. But the S-Tune kit doesn't come with new bushings. As can be seen in the following attachment.I can verify as I have them installed.
Attachment 90591
good info :tup:

looks like the nismoshop might need to update their site.

Fock 06-29-2014 02:16 AM
You are right guys, it seems Nismo OEM kit includes firmer bushings (as stated on many dealer websites) while S-Tune kit does not :icon14:

erichans_Z 08-10-2014 11:21 AM
I need a little clarification help --- so, there are TWO SETS of NISMO springs available?? IE - "NISMO S-tune" springs, and then NISMO OEM, which I'm assuming are what is stock on a NISMO 370z off the showroom floor?

would anyone have a comparison between the two NISMO springs, for height (of actual springs), spring rates and finishing ride height??

I'm a bit confused on which is which at this point, in regards to what might drop a 370z base :icon14:

Quote:
Originally Posted by phill7662 (Post 2307953)
The NISMO O.E. springs & shocks are different from NISMO S Tune .Several people have reported issues off no drop or slight increase in ride height. With the O.E. setup.Please see attachments for a comparison off stock vs. NISMO S Tune springs and swaybars. The info for stock spring rate is from Eibach where it is compared to their Pro Kit.

Attachment 68636 PRO-KIT—NISSAN 2009 DATA: TECHNICAL INFORMATION FRONT: OE rate: Linear 74 N/mm (422 lbs/in) PK rate: Progressive 42-84 N/mm (239-479 lbs/in) Tubing: None Bump-stop: OE Damper: OE OE wheel center to fender: 381mm (15.0in) PK wheel center to fender: 360mm (14.1in) Front Alignment: OE Camber = -0.55 +/-0.75 deg OE Caster = 8.15 +/-0.75 deg OE Toe = 0.04 +/-0.04 deg PK Camber = -1.1 deg PK Caster = 5.7 deg PK Toe = 0.04 deg Approximate installation time: 1.5 hr. PRO-KIT can be aligned to all OE alignment specification except caster. Recommend Pro-Alignment kit 5.72135K. REAR: OE rate: Linear 79 N/mm (450 lbs/in) PK rate: Progressive 38-93 N/mm (217-530 lbs/in) Tubing: None Bump-stop: OE Damper: OE OE wheel center to fender: 377mm (14.8in) PK wheel center to fender: 357mm (14.0in) Rear Alignment: OE Camber = -1.6 +/-0.5 deg OE Toe = 0.085 +/- 0.035 deg PK Camber = -2.5 deg PK Toe = 0.11 deg Approximate installation time: 1.0 hr. PRO-KIT require Pro-Alignment kit 5.72260K or 5.72265K.

Sway bar comparison
Front: 1.1" (27 mm) hollow steel, 5.3 mm wall thickness
OE: 1.0" (26.5 mm), 3.5 mm wall thickness
Rear: 1.0" (25.4 mm) hollow steel, 3.5 mm wall thickness
OE: 0.9" (24.2 mm), 3.0 mm wall thickness
Hope the attachment up loads . If it doesn't the S Tune spring rates are 450 front ,508 rear.


All times are GMT -5. The time now is 10:04 AM.
Page 2 of 2 1 2
Show 40 post(s) from this thread on one page

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2