Send the old springs to me when you put the new coils on :)

Drop looks good. Sorry to hear you scrape on everything..

I started this thread awhile back, post some photos of your car on there: http://www.the370z.com/brakes-suspen...coilovers.html

Anyone have an AccuAir setup on their Z? Friend of mine just bought an S4 and they apparently have a full kit for that, but just a normal kit that I guess can be put on any other vehicle...? Curious if anyone has done it on a 370?

I really dont see how i could get lower and still drive it lol

http://i3.photobucket.com/albums/y82...onSS/front.jpg

http://i3.photobucket.com/albums/y82...anglefront.jpg

Key fob on my garage floor touching my bumper.
http://i3.photobucket.com/albums/y82...021_220212.jpg

H&R Springs
Front 20x9 -3 (with 20mm spacer) 245/30/20 - stock camber arms at -1.8°
Rear 20x11 -5 (with 25mm spacer) 275/30/20 - SPC camber arms at -2.5°

Not as low as most of you but I already rub on dips in the road and any curb even at an angle.

Soon to move the wheels to
Front +7 (with 10mm spacer) -trying to keep stock camber arms
Rear +5 (with 15mm spacer) - changing this to -1.8-2°
Also want to get 255/30 up front and 295+ in the rear.

Or I may trade them for Nismo wheels... not sure I'm into this stance

Looks great Shika -- did you have to use the helper springs or did you get away with it?

Looks great too and I agree with what you said. Otherwise, you have to budget for a replacement lip or bumper.

Need to raise the rear a bit.
after install i also installed my SPC front A Arms, when i hit a certain sized dip the A Arm hits the inner fender well do i need a higher Spring rate? or did i install something wrong?

http://farm6.staticflickr.com/5475/1...c1668117_c.jpg
after by Nemo210nem07, on Flickr

i dont know how u guyz are able to drive around yall must have some nice paved roads.

:icon18::roflpuke2::roflpuke2: no we're just stupid (in love with our Z's) :roflpuke2:

'Slightly" lowered again ;)

http://farm4.staticflickr.com/3762/1...269369b8_z.jpg

You didn't install anything wrong just the spring rate is a little soft.

it's called f*ck it lol

I agree with you guys. I'm not slammed and still scrape. What helped me a lot was raising it a 3/8" and have not scraped since. Still coming it at sharp angles and slowing down on dips. Not totally sold on how it looks so I may lower it 3/16"

This has got to be the attitude when you slam it. Keep it up.

So along the lines of this, any of you on the East Coast go to H2O this year?

Pretty sick (and funny at the very end) video of the 2013 event:

Great Vid, Ocean City is always a blast

I was there Friday and Saturday. It was pretty wild this year.

http://farm8.staticflickr.com/7371/1...04d2ae58_b.jpg
Downtown3 by Nemo210nem07, on Flickr