front inner fender liner problem
 

I got my car lowed and front is lower than rear, my bumper is cracking everday but that not my problem. my front inner fender liner is wear to a big hole on it and all bolt is missing. should I replace it or just take it off? what is the result for take it off? will the rock hit the fender and jump in to engine part?

I'd raise the front an inch or so and replace the liner. YMMV

:iagree:

I can't, I did the alianment already.

will the alignment fail if I raise front and rear both an inch?

It will change.

If u r on stock control arms, your alignment is no good anyway.

it was very bad to around 24 degree with 8 degree error , right now is 17 degree and front driver side is 14degree

what if I only change the tires with the same size?

Is it 24 degrees, or 2.4 degrees? Which is it? The location of the period matters.

:confused:

Changing tires won't change the alignment, if that's what you mean.

Changing tire size will not fix your problem - shorter tires will provide more wheel-well clearance but will lower the bumper even more.


Stop throwing parts on your car without understanding what you are doing. Most mods will have unintended effects on other systems - ofttimes those effects are adverse.

Do some research and planning. Almost every mod you can make to a 370Z has been discussed on this site. Save yourself a lot of headaches and read up on what other people have done.

:iagree:

Since all “bolts” are missing anyway, why don’t you:

1. jack up the car
2. remove the wheel
3. remove the liner
4. now head into the wheel well and look up

You’ll know right away whether the fender liner is needed on a street driven car.

love you rusty, you always got what I mean

I got a Battle Aero Chassis Mount Splitter and I will try to add this on and new inner fender together, has anyone had this before? will this fit my Z1 under shourd? I think I need to remove the front part of the undershourd

No swapping spit, and no taking long showers togethers. Got it?

I have the APR splitter. I had to cut the splitter to fit the ZSpeed under shroud. The Z1 shroud. Have no clue. I figure it will take you a good weekend or so to install it, if you are handy with tools. I don't know what your skill set is.

Get a room geez

Buy rusty a Pista and he’ll love you long time Chen lol

I will try until ohio get warmer, it is frezzing outside I cant even stand out