Stoptech SS hose pics
 

Hi guys,

I've exhausted all searches on web and this site using the370z.com tag and anything google and youtube.

I'm thoroughly exhausted and confused. I have Akeebono on 2017 NIsmo.

Can anyone post pics of the brake hose routing of the Stoptech SS or Z1 SS hoses WITHOUT blocks for 2017 and higher? In other words the kit that eliminates all the hard lines and blocks. I need every angle possible

I have the Stop techs and it comes with two clamps affixed to single hose and a separate cushion clamp.

When I look under the car, there is only the possibility of using the 2 steel clamps.

One youtube video, shows the Akeebono upgrade and he uses a ziptie to LOOSLEY hold up the section that would otherwise flop around. (4:36 https://youtu.be/cgO9BblJ460) very cheesy and dangerous.

However, looks like he forgot about the bolt forward, closer to the caliper. I'm guessing, where he used a tiewrap, I can use the cushion clamp with my own nut and bolt combo and attach.

If I were to just use the existing 2 Nissan positions, that hose will flop around or have harsh angles. I haven't taken anything apart, just side by side comparison.

Thanks.