Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Brakes & Suspension (http://www.the370z.com/brakes-suspension/)
-   -   Looking for advice on replacing front brakes... (http://www.the370z.com/brakes-suspension/125264-looking-advice-replacing-front-brakes.html)

BossJ 01-03-2018 12:43 PM

Looking for advice on replacing front brakes...
 
So Nissan says my front brakes are shot.


I've been getting my traction control light and brake light on while I drive. So I assume they are correct. I've got 41k miles on my 2013 sport package z...

My issue is they quoted me at 700 with labor for just the front brakes. Did this seem correct? Seems like they are charging 550 in parts, and 150 in labor.

Any help would be appreciated it.

Thank you

JLarson 01-03-2018 12:52 PM

That's a lot of money for front brake pads. I'd expect more like $90 for parts, unless they're changing rotors as well; if they're changing rotors, I'd want to see justification for it. Find a friend who will help you do this job and you'll manage for sub-$100.

BossJ 01-03-2018 12:54 PM

Sorry they said rotors as well, however. I'm not sure how they can justify that need. I don't necessarily trust them. So I'll ask a friend :) thank you

Chuck33079 01-03-2018 12:54 PM

Quote:

Originally Posted by JLarson (Post 3719109)
That's a lot of money for front brake pads. I'd expect more like $90 for parts, unless they're changing rotors as well; if they're changing rotors, I'd want to see justification for it. Find a friend who will help you do this job and you'll manage for sub-$100.

:iagree:

Swapping brake pads is dead simple. The dealer is trying to rape you.

JLarson 01-03-2018 12:58 PM

Quote:

Originally Posted by Chuck33079 (Post 3719111)
:iagree:

Swapping brake pads is dead simple. The dealer is trying to rape you.

Ask them to buy you dinner and lube you up first.

OptionZero 01-03-2018 01:03 PM

For a DD?

You can get blank rotors from your local auto parts store and pads for half what they want

I bet a non-dealership place would only charge an hour or two of labor, which should be around $200

This is also a job u can do in your garage, its just elbow grease

Chuck33079 01-03-2018 01:14 PM

Quote:

Originally Posted by OptionZero (Post 3719114)
This is also a job u can do in your garage, its just elbow grease

Yep. Pads and rotors are easy. If you can change your own oil you can swap out pads and rotors.

Senna-F1 01-03-2018 01:48 PM

Check this first: http://www.the370z.com/brakes-suspen...ight-help.html

eZg 01-03-2018 02:27 PM

get the parts you need from Z1, then do it yourself.

1st 01-03-2018 03:53 PM

R1 concept has drill slotted rotors for the low. Got my front and rear sport break package rotors for about $330 shipped after x mas. You can get the oem if you would like for about $227 at the moment and they have a 15% discount when you enter 2018 code.
https://www.r1concepts.com/detail_ca...otor+Silver+++

Forked out about $130 in stoptech sport pads from rockauto. FYI there is also a lot of DIYS on break pad and rotor replacement on Youtube for our cars.

BossJ 01-04-2018 09:29 AM

Quote:

Originally Posted by 1st (Post 3719147)
R1 concept has drill slotted rotors for the low. Got my front and rear sport break package rotors for about $330 shipped after x mas. You can get the oem if you would like for about $227 at the moment and they have a 15% discount when you enter 2018 code.
https://www.r1concepts.com/detail_ca...otor+Silver+++

Forked out about $130 in stoptech sport pads from rockauto. FYI there is also a lot of DIYS on break pad and rotor replacement on Youtube for our cars.

Thank you. You've all been super helpful. You've saved me $350+ and I got front and back - lol !!! Very much appreciated

1st 01-04-2018 02:35 PM

So do you end up going drill slotted or standard rotors?

BossJ 01-05-2018 11:00 AM

Quote:

Originally Posted by 1st (Post 3719395)
So do you end up going drill slotted or standard rotors?

Just standard. :)

fire165 04-18-2018 10:36 PM

Quote:

Originally Posted by OptionZero (Post 3719114)
I bet a non-dealership place would only charge an hour or two of labor, which should be around $200

FYI. I bought front Hawks pads and StopTech slotted/drilled rotors
Nissan dealership is charging me $134.99 for labor.


All times are GMT -5. The time now is 09:59 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2