Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Brakes & Suspension (http://www.the370z.com/brakes-suspension/)
-   -   Metal click when turning steering wheel (http://www.the370z.com/brakes-suspension/124776-metal-click-when-turning-steering-wheel.html)

JerryDeluxe 11-26-2017 02:24 PM

Metal click when turning steering wheel
 
Hello Z community,
There’s a metal click sound coming from the front when turning steering wheel either right or left but more when I turn right. It makes sound at a stop but when driving and backing up or forward when entering garage u can hear it. Took it to Nissan but they couldn’t put on lift I’m too low they said , I only have Swift Springs WTF. Please help. Thank u. Mods Swift spring SPL front camber a 2016 auto sport

JerryDeluxe 11-26-2017 02:48 PM

Do all Nissan dealerships use same lifts? Is there such thing as a GTR lift

echoshotz 11-26-2017 03:57 PM

Quote:

Originally Posted by JerryDeluxe (Post 3710069)
Do all Nissan dealerships use same lifts? Is there such thing as a GTR lift

I thought all Nissan dealers had finally equipped themselves with GTR lifts, but I guess not. I'd call around and find one that has it, along with a GTR spec'd tech to look around. They usually know their stuff better..

JerryDeluxe 11-26-2017 04:15 PM

Quote:

Originally Posted by echoshotz (Post 3710083)
I thought all Nissan dealers had finally equipped themselves with GTR lifts, but I guess not. I'd call around and find one that has it, along with a GTR spec'd tech to look around. They usually know their stuff better..

Thanks bro, Ima call around but don’t kno why they couldn’t lift it I only have sideblades from fly1

JerryDeluxe 11-27-2017 12:46 PM

Lower ball joint is the problem

JerryDeluxe 11-27-2017 04:23 PM

Do I replace whole lower control arm or just the two joints

ZontheRocks 11-27-2017 05:24 PM

My old man had to replace the lower ball joint on his 350 and he just bit the bullet on the whole control arm.

Whatever you choose, my recommendation would be to go OEM.

flyfish 11-27-2017 09:04 PM

Check the SPL spherical bearing (heim joint) alignment on your camber arms, they need to be centered (page 4 of the install guide). Make sure they have not twisted, you could be hearing the bearing bottoming out.

JerryDeluxe 11-27-2017 11:39 PM

Ima check the spl camber bearings, is it common the lower ball joints go bad, can I just replace the bushings

flyfish 12-03-2017 02:19 PM

I have no idea if ball joint failures are common. It looks like you drive a '16?
I find it hard to believe that you already have failure, not out of the relm of possible I guess...

What did you find?

The problem you described was what I had, especially at low speed when turning over a bump,
like a driveway or indentation. No such problem after a straighten of the heim and re-torque.

JerryDeluxe 12-10-2017 11:20 AM

U were right flyfish, spl bearing was the problem. Thank u so much.

SOUTHZZ 12-10-2017 01:56 PM

Thanks JerryDeluxe for letting us know ,"what it was".

Too often on forums,there are posts with a problem.
Suggestions are given. However,the OP just disappears...

Nobody learns anything.

To give and learn is the beauty of a forum.

CRiZO 12-11-2017 07:57 AM

Quote:

Originally Posted by SOUTHZZ (Post 3714053)
Thanks JerryDeluxe for letting us know ,"what it was".

Too often on forums,there are posts with a problem.
Suggestions are given. However,the OP just disappears...

Nobody learns anything.

To give and learn is the beauty of a forum.

https://xkcd.com/979/ :icon17:


All times are GMT -5. The time now is 12:23 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2