Camber help!
 

I will be running close to -1.5 in front and -1 in the rear. Has anyone run into problems getting to those numbers without camber and toe arms?

Yes. Front will be whatever it wants to be. On springs you're looking at -2+.

What spring setup? Trying to do this stock, or aftermarket? That makes your difference...

Tracy Ramsey

If you are set on a specific number, you will need parts to make sure you can adjust to that.

OP, do you have the stock front upper control arm?

You most likely will not be able to achieve those numbers without aftermarket parts.

should specify what i already have stance coils with spc camber arms in the rear but i think tie will be an issue

i will be running a 305 and a 345 tire so more contact the better -1.5 and -1

What's the spec on the rims?

well i just changed them 19x11 with a 275/35/19 and a 19x13.5 with a 335/30/19

19x11 in front? Wow!

What's the offsets?

yeah im going with the aimgain flairs im doing an rwb inspired build so i have to go backwards, so flairs, tires, then wheels cant get offset till i determine the offset
will probly be around 0 offset in front maybe -10 and the rear i have noooo idea close to 0 again -10

Wheel Fit Videos

this is how i will find my offset

Ahh, fender flares. I thought you were gong to run that set up on a stock body! Lol

You got a build thread? Would love to follow your progress.