Sorry the V1 is no longer made, The V2 is better in every way ;)

Ok cool.

One more question though. How do you order the aluminum version? The details say to "click button below", but there's no button.

In Stock in Both Styles!

Awesome, gonna put an order in while they're in stock.

Looking to get the Base version 2 Powder coated, with SS hardware. :tup:

Order placed. :tiphat:

Bump! In Stock!

Thank you!

Bump!

Order placed on the 24th, package arrived on the 27th. :tup:

Note: The bolts that come with it if you order the SS hardware kit are HEX Sockets. Joe, what size are they cause I need to go get a hex socket bit set. :facepalm: :icon17:

And there isn't an "instructions" page included that I noticed, am I guessing it's just swap old parts 1 for 1, with washers?

Will the plastic rivets be re-used or are bolts going in their place now as well?

Remove/Replace, Pretty simple once you get down there.
You should have received 3 new plastic rivets for the middle part. The rest use bolts/washers

Hex key is a 5/32" , You can reuse the old bolts also which are 10mm head size.

Just what I needed to know. I'll pick one up this weekend and knock it out. :tup:

Bump!

Shipped to 32955?

Joe, I have a bit finally and hopefully will have it installed early afternoon tomorrow. I'm going to document it for some people locally, I'll post them here in case you want to use them. :tiphat: