Got my fenders yesterday, opened the box and was shocked to see literally no packaging to hold the pieces in place safely. My fear of the fenders getting damaged during shipment came true, when I inspected the parts closely. Part of the driver fender is chipped?

https://picasaweb.google.com/1096736...73790499232930

I've sent further details to A.J for now, will see how to best handle this. I was hoping to start the fitment and install today, but that'll have to wait now :/.


On another note, I tried going cheap with an FRP, so take my advice, add the extra $'s if you can and buy the CF version instead. In the long run, seeing the quality of these fenders in FRP, I wish I had paid the extra $'s to get the CF versions.

5) Jquad FRP (At FedEx location)
6) Rsdntevl FRP (Deposit recieved)
7) JunoonX FRP (Deposit recieved)
8) cmmonte92 FRP (Deposit recieved)
9) Iwan72 (Deposit recieved)

9 Jquad (made & shipped from Autokitx, delivered already)
10 Fastpaced (made & shipped from Autokitx, delivered already)
11 370z1 (made & shipped from Autokitx, delivered already)
12 Phunk (made & ready to ship today from Autokitx)
13 JunoonX (made & ready to ship today from Autokitx)
14 Iwan (in the making)
15 cmmonte92 FRP (in the making)
16 Rsdntevl (in the making

This is outrageous, why had I been pushed back to the very last spot?

I'm very sorry to hear that. Hopefully everything works out for you. I can't believe it was shipped with the fenders free to move inside.

Thanks for the quick reply, just want to confirm FRB $550.00ea fender and $150-$170 ea to be shipped or total? silly qustions but don't want to send you 1/2 the money lol
Great ETA imo I am not in a rush since the car will be store in less then a month till spring :(

I agree, I hope you get an answer.

Particularly since I bought them from you instead of directly from CS after seeing that you were so high on the buy list.

Anyone install the fiberglass version yet?

AJ, i've just received mine this morning :tup:

http://farm7.static.flickr.com/6114/...3b403968_z.jpg

thanks bro!:tup::happydance:

any updates??

:iagree:

Hello AJ,
Thanks again for the fenders, they are holding up good, finally got around to snapping some shots.

http://www.the370z.com/members/370z1...ure40613-2.png

http://www.the370z.com/members/370z1...ure40591-2.jpg

http://www.the370z.com/members/370z1...ure40594-5.jpg

http://www.the370z.com/members/370z1...ure40614-3.png

Pics not loading.

How was fitment? Did you get the fiberglass version? Any extra work required to make them fit?

How do we go about purchasing the fenders???

Hello 370ZJT,
Yes I went with the fiberglass version which came with a coat of primer from them. There were some minor imperfections in the surface meaning some small bumps and uneven sanding areas however the body shop smoothed them out. The fenders as they come are pretty much ok to just paint and then mount but to make an extra effort to ensure a nice end result with the painting you may want to ask your body shop to apply a thin layer of bondo and then sand to perfection before final paint work. The fenders themselves are very thin so they need to use care when handling. So far mine have held up and there was no major effort on getting them mounted. The only thing I noticed was the gap between the door and the fender is about an 1/8 wider. Not a big deal but it is larger than the stock gap but I guess that is expected with after market parts. Over all they have done well since installed.

Cool. What color Z?

What shop in CA did the paint matching.

I had a local shop near me do the work. Any reputable shop should be able to get close but it will never be exact because painting has a lot a variables to it. Even buying the paint directly from the dealer won't be exact but it you wanted to be sure that would be the way to go in my opinion. I didn't go that path because the paint from the dealer was too expensive so the body shop did their best to get as close as possible. My suggestion would be to get 3 quotes from different places and go with you you feel is the right one. My body shop gave me 5 years warranty on the work. They also worked on the doors a bit to feather in ie:fade in the new paint with the factory paint so it wasn't so obvious.

I want this fender on CF!
Do you have an e-mail to contact?

Thx!

I'm interested in purchasing a pair of the FRP fenders, how do I go about doing so?

-Matt

370Z1, where's the pics?

any updates on the fenders?

I tried pming to buy some but no answer

Sent from my SPH-D710 using Tapatalk

are these direct fitment, paint and install? or does it need prep for fitment?

PM FRP Price shipped to 77511. Thank you.

hey carbon i have been pming you about these..... :D

i have not installed mine yet. only just slid out of the box to peek at. not sure if my Z is going to get to the body shop this year or not now, currently spending too much money with other stuff and think I am buying an additional car next month, so if anyone is interested, i can get you pictures. Mine are the FRP.

Pm sent!!!!

I would like a pair with just the pocket in CF. Price?

price for both FPR and carbon fiber to 48823? thx!

Guys, we are still intended to offer fenders but need some time to fix some issues which we had with our partner for the delay in delivering them.

We are receiving lots of pms and seems like there is still interest in these, so we can get a lot done and will ask you guys to write your name in the list below so we can take it from there. Time wise it will take some time.

1)
2)
3)
4)
5)
6)
7)
8)
9)
10)

Someone quick! jump into this! :tup:

I want a set of fenders but would need more info on how long it would take to get a set.

Same here. I've been wanting to buy these but need to know what type of wait are we looking at.

I'm interested, but would want to only pay a deposit before the fenders are ready to ship. What is the CF and FRP price, and what would you ask for a deposit amount?

Thanks.

I will need to know an approximate lead time and price shipped to 62234 if possible. Thanks Carbon.

Do you still have this deal avail? If so let me know what i need to do. Thanks

What he said. Very interested. Please pm me a price shipped to 70079. Thanx

i would love to be part of this. i'm new to these boards, and have no idea how to join a group buy, but am willing to participate for these bad boys.

Shot me some numbers on these please....no CF and if possible without the Z hole.

hey guys. still waiting for your pay pal numbers so i can order this fenders CF (if available), and the fujimura front bumper. also the downpayment price so i can get the rest of the parts started.

As Most of you know , we had couple of issues with our partner who was making those in the US to save on shipping, so we decided to stop the US production for now until we find a reliable partner.

And since we are getting lots of interest in those sexy fenders, we decided on the below :

- We will be making these Fenders in Dubai after we get confirmed orders.
- Ship all of them together in one shipment (to save on shipping) to our partner in Arizona. and from there it will be shipped to each person.

Simple :tup:

- In case someone wants a his order to be separately then we can do that but keep in mind that the shipping will be around 800to 900$.

Making: We have two options to do it !!!

- Using OEM feneders and them modify them ( subject to availability of OEM fenders )
- Full FRP, we will need to make a mould.

but again guys.. there is no point of making these if we dont have enough interest cause the shipping is high.

Payment: We will be taking just a deposit and then the rest of the amount once its ready for shipping.

Lead time: 1 week each set after the mould is ready. (in case of FRP) and 1 week each set from the date the OEM fenders reach our offfice.

Hope i have answered most of the questions.

Thank you guys for your interest in our products and we will continue to support you guys as much as we can. :tiphat:

B.R
Naj

These fenders are amazing, I feel they really added to the lines of my Z.

While it would be cool if you offered them with a signal delete option, it's easy as pie for the body-shop doing the painting/install to do that themselves..