Anyone else?

1. mag_black
2. isayimandrew
3. alphajam
4. nobdy_#608
5. zilverbullet
6.
7.
8.
9.
10.

BTW, I just thought about it. If there happens to be any CS GB's going on, we could have them make V1's w/ OEM and ship it all over w/ the other GB. That's where we're saving the $$ in this GB anyways.

No not necessarily it depending on how full the shipping container is, there is only so much room in them.

of course, assuming there is space.

In for V1s.

I wrote them a dm and still haven't heads from them. If group savings are significant then I am IN!


Sent from my iPhone using Tapatalk

Same here waiting on a carbon signal to reply to my message and then im in


Envoyé de mon iPhone à l'aide de Tapatalk

1. mag_black
2. isayimandrew
3. alphajam
4. nobdy_#608
5. zilverbullet
6. mfeinst
7.
8.
9.
10.

Added you, hope you don't mind.


Theboydiddy, CS said it's $550 for fenders plus $100 to ship to AZ and shipping from AZ to it's final destination. I had my lip shipped from AZ and it was $150; just so you get a general idea. These are the best looking fenders IMO and you will have some exclusivity purchasing because of availability and cost.

What's the exclusivity? I'm not saving anything. Where's my savings? Why going to Arizona? Why not straight to my house?
(I'm sorry I'm being a pain in the ***, but I'm trying to save some money and also join this list so I can help others to save as well. But the numbers aren't showing me any savings at all. Also not making sense to me why from factory going to Arizona, when can go from factory to my place. Again I'm really sorry for being annoying, but I'm just trying to have a better understanding.)

Thank you for your understanding.


Sent from my iPhone using Tapatalk

All CS products ship from Dubai to their partner ConceptZ in AZ. Unless you want to pay for direct shipping (fenders $600-$700) from Dubai to your front door.

Full retail price for V1 fenders made from OEM with CF vent before shipping $850. Still don't see the saving of a GB?

$850 before shipping ok. I see. If from Arizona to NYC shipping is $150 that will bring me up to $850.

Again thanks for the explanation. Sorry for so many questions.


Sent from my iPhone using Tapatalk

^^exclusivity because you can see how hard it is to get them made. Not everyone is willing to pay the price. They're not cheap so most don't want to buy them, meaning less will have them.

I totally understand. Please don't think I'm trying to be a wise guy at all. I was just trying to figure it out prices and all. It isn't easy to spend a gran on car parts like it's only one hundred dollars for me. Haha. And I was just wondering because aero jacket think it's called. Was charging only $600 shipped. I'm trying to google and find out as much as possible why the huge money difference. I do not doubt you at all. Again thank you so much for explaining everything.


Sent from my iPhone using Tapatalk

^^^Not at all man. I was confused w/ the savings myself until I PM'ed them. :tiphat:

Hey sorry guys but count me out... Will be trying to find a way to get the v2

I'm gonna have to back out of this group buy...
1. mag_black
2. alphajam
3. nobdy_#608
4. mfeinst
5.
6.
7.
8.
9.
10.

I took zilverbullet off the list as well.

We can make fenders for you and ship direct to you, but then as you are not local there is a cost involved for shipping which needed to be taken care of.

We charge 450-500$ for cars here they drop the car we open the fenders get the work done and install it back works out really cheap but if you aren't local then unfortunately there is a cost. Our local cost is way less then any other vendor in USA.

In GB (some discount and Group shipping) we did few for different parts in past few months and worked out good, you save a little on buying and we chip half the cost of shipping the bulk to USA to our distributor then people cover internal shipping, there is a good saving in the end only down fall is the timeline as getting all products done then shipping time and sorting time in USA.

These were the first ever fenders offered here on the forum and have the best fitment there by reducing the bodywork needed by bodyshop more like bolt on fitment. It gets expensive because of shipping but its upto the guys in the end what the customer is looking for.


I will try to get a thread running in exterior section for interest if enough we might make these in FRP and get it going on.

Damn how did I miss this. Count me in! :tup:

1. mag_black
2. alphajam
3. nobdy_#608
4. mfeinst
5. UruZai
6.
7.
8.
9.
10.

Just 5 more people!

1. mag_black
2. alphajam
3. nobdy_#608
4. mfeinst
5. UruZai
6.
7.
8.
9.
10.

I am in for OEM CF, painted K51 shipped to 33647 asap :driving: Please PM me with payment info. Thanks

Pm'ed

Do these fit the 2013 model?

Nissan didn't change the fenders from year to year so, yes they should fit.

Still going?

What is the price?

CS are we still doing this group buy?

We will do once there are 8-10 people

I may be interested in purchasing a pair of these sexy fenders in a month, depending on the total price offered to a GB, what kinda deal am i looking at? I'm interested in a non painted pair, preferably OEM finish but I could go for carbon fiber finish if there's significant weight reduction and the extra cost of material isn't that much higher. Hit me up with a GB price pretty please!

Add yourself to the list.



Tapatalk

Pm shipped to 14303

PM the price for the FRP with half CF shipped to 35401. I would like to be added to the group buy as well. I just need to know the total price.

Can I get a price shipped for frp and half cf to 11787

Guys we are doing these fenders just shipped one this saturday but for people who are local or who pay for core charge (NEW OEM fenders)

Price is as below incase anyone interested please do send us a pm

FRP 450$ and CF 650$
Core charge 400-420$ (new oem fenders)
Shipping 550$-600$

If there are enough people in GB we can make these in FRP without need to OEM fenders like our V2

And just to clarify for others. It's

$400 for OEM fenders
$450 for labor to mod OEM in FRP
$550 to ship to USA.

Total: 1400

Correct?

So could I not get the half FRP/ half CF overlay like the pictures below?
Would it just be ($550 + shipping) since it is not full CF?

http://i1124.photobucket.com/albums/...l/Nitrouz6.jpg

http://i1259.photobucket.com/albums/...vtran/CSF5.jpg

That's a OEM fender, with full CF vent. So you would have to pay the quoted CF price.

Core charge $400-$420 (new OEM fenders)

Price to mod OEM with Frp vent $450 or CF vent $650

Shipping $550-$600

If there are enough people interested we can make these in Frp without the need for OEM fenders like we have done with our V2 fenders.

I'm still interested if we could get people. The most we had interested, were 7.

Been a while but we have put making mold of V1 in pipline to offer in FRP/CF, will be done sometime in September.

Can we have the list of people interested so if more can arrange a group shipping and if more a GB pricing as well.

If we have enough people like 10... what would be the price?