Carbonsignal GTR Style Gauge Pack
 

After the first successful GB we are releasing forum prices for both KIT 1 and KIT 2.

We have two kits one for base/nismo without any stock screen which is KIT NO 1 and for people with stock navigation screen either Z or G35/37 there is KIT 2.

Kit ONE:
Comes with 7' screen, HDMI cable, rotary joystick, control module, and optional extra sensor ports 600$
OBDII reader with cable: 108$

Console comes in three finishes and design is simple but without airlift module as in DEMO pics its just the joystick and CS emblem by default.

Console FRP 200$
Console FRP painted matte black 250$
Console CF 470$
Console Wrapped in leather and alcantara 475$

Any other module needed installed in the console will be discussed and quoted case by case.

Everything working in the pics and video is only via OBDII, but for boosted guys following are optional sensors needed if any of these readings are needed, oil temp will come with sensor (free). There is a port for these below reading in the module so all what is needed is hooking up the sensors and two or three wires in the module.

NA Gauges pics (Fuel pressure needs sensor mistake in pic)

http://i1124.photobucket.com/albums/...psplyxmbyy.jpg

FI Gauge pic (Fuel pressure needs sensor mistake in pic)

http://i1124.photobucket.com/albums/...psx3zrcaql.jpg

Below are additional sensors incase anyone needs these

Exhaust Gas Temperature (EGT) K-Type thermocoupler probe sensor $85
Oil Temperature Sensor $20
Boost (MAP) Pressure Sensor $55
Intake Air Temperature Sensor $20
Intercooler Air Temperature Sensor $20
Fuel Temperature Sensor $20
Transmission Oil Temperature Sensor $20
Gearbox Oil Temperature Sensor $20
Exhaust Manifold Pressure Sensor $62
Fuel Pressure Sensor $62
Oil Pressure Sensor / Sender $62
AFR (Air Fuel Ratio) Wideband Controller Functionality $230


Kit TWO:

Its for people already with navi screen, kit comes with, rotary joystick, control module, and optional extra sensor ports in the module 435$

OBDII reader with cable: 108$

For Navi screen guys there is not need for screen and buyer will keep all existing functionalities of stock screen like navi, audio etc.

Any optional sensors price as above.

There is a provision to add rear view camera in the screen as well, and all gauges can be adjusted for redline

Readings can be made in kmh/Centigrade/Bar or m/Fahrenheit/PSI

Installation Instructions are attached

Shipping the Kits is approximately 75$ worldwide




http://i1124.photobucket.com/albums/...psujo4flko.jpg
http://i1124.photobucket.com/albums/...ps5a7qegrn.jpg
http://i1124.photobucket.com/albums/...psc2h8h7g9.jpg
http://i1124.photobucket.com/albums/...psyhism6fu.jpg
http://i1124.photobucket.com/albums/...psesqeygbe.jpg
http://i1124.photobucket.com/albums/...psrtp16ogh.jpg
http://i1124.photobucket.com/albums/...pshfkwmyh3.jpg
http://i1124.photobucket.com/albums/...psmzxmqysd.jpg
http://i1124.photobucket.com/albums/...pskqdgvddu.jpg
http://i1124.photobucket.com/albums/...psxjnyim7z.jpg
http://i1124.photobucket.com/albums/...psxylm3erb.jpg
http://i1124.photobucket.com/albums/...pskdxskfmf.jpg
http://i1124.photobucket.com/albums/...ps28bwliom.jpg
http://i1124.photobucket.com/albums/...pstrfsnurc.jpg
http://i163.photobucket.com/albums/t...t/DSC00826.jpg

KIT 2
http://www.the370z.com/attachments/b...s-img_0722.jpg
http://www.the370z.com/attachments/b...l-gauges-4.jpg
http://www.the370z.com/attachments/b...l-gauges-3.jpg
http://www.the370z.com/attachments/b...l-gauges-5.jpg

I want to buy kit 2 with 3 extra sensors. Can I order from your website now or?

We are launching new website this month so not updating old one.

Send me a pm with all details, your name address, contact number and email address


www.carbonsignalauto.com

Pm sent. Thank you

P.s. My wife bought me one of your Nismo rear diffusers for Christmas �� Can't wait to get it on

What's the status of my order

Are the gauges that display on each screen changeable?

Can you send me or post a copy here of the installation instructions?

Also, do you have pictures of the different finishes? Which finish is this:

http://i1124.photobucket.com/albums/...pszd0hapcj.jpg

You will be getting an email, ready to ship except one part which will be shipped separate.

Yes Gauges are changeable but there will be a charge for designing, else you can choose NA or FI scheme.

People are posting as they are installing in different finishes but currently we have only either CF or normal FRP and one you quoted is a prototype which we made in the beginning based

Instructions attached in first post

Ok thank u. Any news on my lip kit also

tracking number sent for gauges lipkit has one item pending to be ready. I will prefer if you request an update from same email address from where tracking was sent or via pm.

I have the navi screen and I want this kit is there any way it could be output to a composite (CVBS) display?

bump

Is there a way to do speed output signal to connect it with Tein EDFC PRO?

No for both



www.carbonsignalauto.com

Looking at the pictures the oil temp display reads 50c and thats around 122F. the nissan gauge reads a little over 180F why are the temps so far off? it doesn't say oil temp needs an external sensor.

Hi,

Kit 2 output via the AUX port?