Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Boardwalk Nissan - Supporting Dealer (http://www.the370z.com/boardwalk-nissan-supporting-dealer/)
-   -   Sport spoiler template (http://www.the370z.com/boardwalk-nissan-supporting-dealer/27728-sport-spoiler-template.html)

v8zracer260z 11-13-2010 08:00 AM

Sport spoiler template and hardware
 
Looking for a factory template for installing the rear spoiler mine did not come with one. Any help would be appreciated! I also need to see if any one can get the part numbers for the fasters on the back of the spoiler as Nissan only shows the ones that snap in the lift gate. I have the grommets nuts and 2 bolts that thread into the spoiler. I need the bolt that attach to the spoiler the nuts go on. I appears to be a T bolt with a flat head. I also need the clips that attach to the spoiler and clip in to the grommets in the holes on the liftgate.
Rick

TreeSemdyZee 11-13-2010 09:57 AM

I mounted a wing on my 350 and what I did was attach thin mylar to the wing and traced the outside of the base and circled the screw holes. Then taped the mylar to the car and transferred the info to the car. I thought I had screwed up when I mounted the wing because the bolt holes didn't match up at first. When I tightened the bolts down, everything was perfect.
There was a little arc in the base, but that all tranferred properly when I taped the template flat to the car.
I was so excited when it worked that I literally looked very similar to this. :happydance:
My neighbors probably thought I was crazy.

Thought this might help if you can't find a factory template.

v8zracer260z 11-13-2010 12:25 PM

Thanks I've done this before but just figured I'd ask if one was out there first in the intrest of saving time making one. I also need to see if any one can get the part numbers for the fasters on the back of the spoiler as Nissan only shows the ones that snap in the lift gate

jtt 11-13-2010 10:50 PM

All of the fasteners can be found here:

Part Detail

I think you'll need the following quantities:
96032J Grommet (x5)
96028 spacer (x1)
96029 spacer (x1)
08146-6162h bolt-hex (x2)
08911-2062h nut (x4)

jtt 11-13-2010 10:55 PM

Quote:

Originally Posted by TreeSemdyZee (Post 808218)
I mounted a wing on my 350 and what I did was attach thin mylar to the wing and traced the outside of the base and circled the screw holes. Then taped the mylar to the car and transferred the info to the car. I thought I had screwed up when I mounted the wing because the bolt holes didn't match up at first. When I tightened the bolts down, everything was perfect.
There was a little arc in the base, but that all tranferred properly when I taped the template flat to the car.
I was so excited when it worked that I literally looked very similar to this. :happydance:
My neighbors probably thought I was crazy.

Thought this might help if you can't find a factory template.

How did you know exactly where to line up the template on the hatch?

v8zracer260z 11-14-2010 06:07 PM

I already bought those fastners but need the blind bolts that the nuts go on and the fasters that go from the spoiler to the grommets. I'm going to Florida fastners tomorrow to find something if the dealer can't find anything.


All times are GMT -5. The time now is 02:55 PM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2020, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2