Nissan 370Z Forum - [HELP] Radio Signal on DNX 6140

Page 2 of 2

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Audio & Video (http://www.the370z.com/audio-video/)

- - [HELP] Radio Signal on DNX 6140 (http://www.the370z.com/audio-video/9135-help-radio-signal-dnx-6140-a.html)

AK370Z

09-21-2009 11:43 PM

Quote:

Originally Posted by kpyo2000 (Post 207941)

Guess what!! The installer told me that its normal. I was like what!! Supposely he was saying that its common for the after market audios and plus he was like "mine is like that too" which relieved me. jk So this is my story from the shop.

Do you have tint on your windows?

bigaudiofanat

09-22-2009 08:16 AM

I for one sec do not believe that is normal for an aftermarket head unit to get crappy signal. I might recommenced that you pull the head unit out and take a look to see if there is even a wire connected there. Maybe even a picture.

kpyo2000

09-22-2009 08:04 PM

yeah it was crystal clear on my stock system. I do have windows tinted and it worked fine with my stock system. I am going to argue this matter with the installer. This is unacceptable.

bigaudiofanat

09-22-2009 08:08 PM

I agree man, what I would personally do is ask to watch them pull the head unit out and see the wiring and verify that 1. the antenna adapter is there and 2 that it is all connected properly.

ConchZ2

09-22-2009 09:22 PM

I had the same initial problem in my Pioneer HU. I researched in the HU’s menu and found that the power source for the antenna amp (blue wire) was in the off position.

bigaudiofanat

09-22-2009 09:25 PM

Kenwoods do not have that feature it is always on.

kpyo2000

09-23-2009 12:35 AM

thanks for the help. I really appreciate it! I'll need to installer again in two weeks for my sub installation so I will let you guys know.

ConchZ2

09-23-2009 07:40 AM

You could have a defective unit…………It’s statistically impossible not to have some defects in a manufacturing process, mechanical or electrical.

All times are GMT -5. The time now is 09:00 PM.

Page 2 of 2

Show 40 post(s) from this thread on one page