![]() |
Budget Setup Opinions
I would like to have better audio in my car but my budget is pretty tight. I have come up with the setup below:
-- Pioneer AVH-P3200DVD Head Unit -- Polk Audio db6501 component speakers -- JVC KS-AX3002 Amp for speakers -- JL Audio 10W1v2-4 sub -- Alpine MRP-M500 Sub Amp -- Boyo VTB170 Rear View Camera I am thinking in either a Zenclosure or making my own enclosure. What do you guys think of this setup? Anything I should change? |
Drop down to a nice rockford fosgate punch stage two or polk mm series sub and save some more cash no reason to go after JL and their price tag.
I would get the zenclosure. |
Get a better rear camera.. I recommend the Pioneer ndbc4 or the kenwood CMOS 200
|
Thanks, but I can get either one for about the same price maybe a $10 difference.
Is there a benefit on the Polk MM over the JL? Other than personal preference And if I go with the Polk, should I get the Dual or single voice coils? Do you think I should get the amp for the component speakers or just run them from the HU? The amp is only about $50 |
Get the dual and the polk is going to be plenty of good quality bass same as the JL might be a tad more efficient as well. You can run the db's off the head unit.
|
Here is my suggestion for a budget friendly but well rounded setup.
-- Pioneer AVH-P3200DVD Head Unit -- Polk Audio db6501 component speakers -- Kicker 08ZX550.3 Amp for the components and the sub -- Kicker Solo-Baric L5 08S10L54 sub -- Kicker ZCK44 -- Pioneer ND-BC4 Rear View Camera As for the box you can buy the Zenclosure or if you have some basic wood working skills you can build your own just like it for half the price. You can run the components off of the HU but you'll be giving them less than a quarter of the rms power that they can handle, you and the speakers will happier in the long run with more power. The 3 channel Kicker amp is inexpensive and has plenty of power for both the components and the sub its worth the money. The amp kit comes with everything you need to do the install. You can change the sub to anyone that you would like, look for single 2ohm or dual 4ohm voice coil and around 400-450rms watts it will work great with this amp. I priced all of these products at sonicelectronix.com Car Audio Stereo - Car Subwoofers - Car Amplifiers and Speakers, the price came to $1,124.95 shipped and it will include the dash install kit, HU wire kit, and antenna adapter. This is obviously not the most high end system but it will be one that you can be proud of and very happy with for less than some people pay for just their headunit. I hope this helps and good luck. |
Kicker makes good amps for subs but for speakers not so much I would go with an alpine if you go with an amp to power speakers. Or even use the add on amp that alpine sells and just wire it into the pioneer head unit.
|
The power from the kicker amp is much better than using the HU for power which you initially suggested. Sure there are better amps but we're talking budget and for $200 for an amp that will run everything in the car its hard to beat. Also the power from the kicker amp is more than clean enough to power Polk Db's its not as if they're the best speaker, quality for quality they are well matched.
|
not to get off topic but i've been told you don't need a dash kit.
most dd with slide right in. i hope so cause thats the way i would like to go. the ones i've seen on line or butt ugly cheap plastic and spray painted? |
I would pass on the amp and get a better camera.
|
Quote:
|
Thank you very much for the help guys.
Unfortunately there has been a small change of plans as my car (2 weeks old today with 850 miles) just got hit on the driver rear quarter panel, so I will have to get all that resolved before I can get into this. |
Doh! Sorry to hear. :(
|
Quote:
|
Let us know if they total it but I would be furious if they did. They better buy you a new one if they do. Good luck.
|
All times are GMT -5. The time now is 02:33 AM. |
Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2025, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2