Alpine or Similiar DD HU Wiring Diagram
 

I put this together for my car, just to be able to reference in the future if I have a problem with anything.

I thought I would share with you all. Hopefully someone will find it use full.


Although I have installed all Alpine gear, I would think 90% will work for any HU or Amp Speaker combo, just substitute the hardware.

http://i26.photobucket.com/albums/c1...stemWiring.jpg


HU: Alpine W900BT
AMP: Alpine PDX5
Speakers: Hertz HSK 165
Sub: JL Audio 13TW3
Bluetooth: Alpine KCE400B
Backup Cam: Alpine HCE105C
Steering Interface: Metra AXXESS
Alpine Bypass Module: PAC TR-7
Metra Wire Kit:70-7552 - Nissan harness 2007-up
Metra Antenna Adapter: 40-NI12 - Nissan antenna adapter 2007-up

i see you used the pac. I am in the process of trying to get mine to work. Where is the easiest place to hook up to the foot/hand brake signals?

Take a look at these babies, so much easier. Direct color matching as well.

Amazon.com: MicroBypass Parking Brake Override Bypass for Alpine: Car Electronics

For steering wheel controls I highly recommend using the metra axxess over the PAC, no need for resistors or changing codes or modes.

Nice job Zuppy