2020 Touring Bose Swap
 

I have overcome almost all the hurtles of swapping out my Bose with a Nav unit. I got the AC and rear defogger worked out thanks to the posts in this forum. The last one is the rearview camera. I was hoping to use the stock camera.

For the 2020 model, the pins listed in the 2015 manual are not there. I can also not find one connector based on the number of wires and their position. There must have been a change.

I figured I could just trace them. No luck there. I cannot locate the power (red wire) for the camera and the other three (yellow, white, and ground) all tone to ground. I am using a voltmeter set to the tone-setting when connectivity is achieved.

I have the bumper facia off. I am wondering if I can just run new wires to the stock camera off the head unit or get a 3rd party camera.

Any help would be appriciated.