2015 370z Base Headunit Pinout?
 

Can someone else with the pinout on a 2015 base headunit? I tried looking into the FSM but the one I downloaded was in Greek.
Maybe a better start would be to find out what the middle 2 outputs are on the back, see first pic below. I was guessing USB and AUX but this isn't my area. :)...maybe the white block on the left is for the Tel Adapter Unit?

Thank you for any help in advance...

-Jeff

The black one is USB and I think the other one is for the aux input and the bluetooth module.

I should add I have the 2016 Service manual if you need the actual pinouts. If your replacing the radio with an aftermarket unit you can ignore the white connector and get a USB adapter to plug into the end of the black cable to keep the USB port in the center console working. I just changed my radio last week and that's all I did. I ignored the AUX in jack since I never use it.

Thank you for the input...I'm actually going about this unconventionally. Adding the head unit to my wife's '08 Pathfinder. Normal speakers/power/ground harness still works with the Pathfinder, regardless of being 6+ years older.

I'm trying to secure a harness that will allow the USB/Aux to be used in her Pathfinder with this HU.

Just wanted to say a thank you to the OP. :tiphat:

Whilst removing the steering wheel airbag on my car I managed to whack one of the stereo knobs with a ratchet and left a small mark on it.

From your photographs I was able to identify my stereo and search on the internet.

This led me to Pacparts.com in the USA.

The replacement knob was delivered today - $5 knob & $36 shipping but much cheaper than a replacement stereo. Gratifying to know you can still fix some things in today's throw away world.