Hogwash. I've made it from here to Niagara Falls in less than a day, non-stop. And we have room. :nutswinger:







BTW, I would never make a trip like that again non-stop. That was pure torture.

I did Daytona beach 4 times in the last couple of years.. Non stop 17 1/2 hrs. Slept good when we got in...lol

I like it! That looks nice and sleek. I'm slightly disappointed that there's no LED laser show projecting from the hatch lid though. Any stuffing/damping going into those sub boxes?

Meh... I'm past all that flash and bling....... And I am going to try the boxes with 1/2 lb of poly fill. I'm at .62 cuft or so, so figuring 10% gain with poly puts me around .68..... Manufacturer recommends .5 to .7
My last box was right at .5, and I can tell the difference at .62 (unless im imagining it, which is very possible as well. lol)

prepping and glassing tweeter pods today.....

One side finished. I have to pick up some Matt finish paint to get rid of the gloss, and shes good to go.

Looks great! on axis sound in both pods?

Your thoughts on that location vs. a stock location with the same concept of pods?

not quite on axis. directed at opposite side window, close to center. IMHO, they are too close to put directly on axis. I think corners of the dash, in pods, or even a-pillars would have been a better choice, as far as getting path length differences closer to match.... But I did a mock up of some pods for the dash location, and just couldn't get used to the sight of them there.
I'm relying on processing to make up for the closer location.
I'm still awaiting the arrival of my pair SI BMmkv'5, but have my single Mkiv installed, and swapped out my CDT mids for a set of Dayton Audio mids.. (Definitely an upgrade) I did a little tuning to occupy myself being off work and all. The current rendition is by far the best its ever sounded.....