Nissan 370Z Forum

Nissan 370Z Forum (http://www.the370z.com/)
-   Audio & Video (http://www.the370z.com/audio-video/)
-   -   Where to connect Metra Antenna Adapter? (http://www.the370z.com/audio-video/122619-where-connect-metra-antenna-adapter.html)

3.7 ZPA 07-11-2017 07:20 PM

Where to connect Metra Antenna Adapter?
 
I really didn't want to create a new thread for this, but after hours of searching, I couldn't quite find the answer to my particular question.

My fiancé bought me a Jensen HU a couple of years ago that I'm just getting around to installing now. I know their quality is kind of dubious, but I'm more concerned with performance than audio. However, I did want something that could play my iPod, so this is the route I opted to take.

Anyway, I have the Metra 70-7553 harness adapter soldered to the head unit's harness already. My question is where the hell do I connect the blue wire for the Metro 40-NI12 antenna adapter? I have seen many threads stating that it should be connected to the blue power ant and amp wire, but I already have the blue/white amp turn-on wire attached to this. Do I have the adapter wired correctly? Please help a complete amateur.

http://www.the370z.com/members/3-7-z...711-194509.jpg
http://www.the370z.com/members/3-7-z...711-194213.jpg
http://www.the370z.com/members/3-7-z...711-194244.jpg
http://www.the370z.com/members/3-7-z...711-194450.jpg
http://www.the370z.com/members/3-7-z...711-194458.jpg
http://www.the370z.com/members/3-7-z...711-194519.jpg

Jayhovah 07-11-2017 08:22 PM

You can connect both the amp remote turn-on wire and the antenna power wire to the power ant output from the headunit.

3.7 ZPA 07-11-2017 08:45 PM

Quote:

Originally Posted by Jayhovah (Post 3673734)
You can connect both the amp remote turn-on wire and the antenna power wire to the power ant output from the headunit.

That's exactly what I was wondering, thank you. Obviously I can't solder 3 wires together. How should I go about connecting them? Crimp/butt connector?

Jayhovah 07-11-2017 08:46 PM

Quote:

Originally Posted by 3.7 ZPA (Post 3673750)
Obviously I can't solder 3 wires together.

You sure can =)

3.7 ZPA 07-11-2017 08:50 PM

I'll give it a shot, then. Thank you for your help! /thread.

SouthArk370Z 07-11-2017 10:24 PM

Quote:

Originally Posted by 3.7 ZPA (Post 3673750)
That's exactly what I was wondering, thank you. Obviously I can't solder 3 wires together. How should I go about connecting them? Crimp/butt connector?

Quote:

Originally Posted by Jayhovah (Post 3673754)
You sure can =)

Just twist the new wire(s) around the old joint and solder as usual. Keep all the wires steady to avoid cold solder joints.

OldGuyFla 07-12-2017 12:11 PM

Putting heat shrink on before soldering would make for a better final result.

3.7 ZPA 07-12-2017 08:04 PM

Thanks for the help, fellas. Everything's done, except I have to pick up some mounting tape for the microphone, and GPS unit. I still have them hanging on the steering column, behind the wheel.
http://www.the370z.com/members/3-7-z...712-204047.jpg
http://www.the370z.com/members/3-7-z...712-204055.jpg
Everything works like a charm.


All times are GMT -5. The time now is 10:22 AM.

Powered by vBulletin® Version 3.8.4
Copyright ©2000 - 2024, Jelsoft Enterprises Ltd.
Search Engine Optimization by vBSEO 3.6.0 PL2