Alpine ILX-007
 

Has anyone installed one of these in the OEM non-nav unit locations below the cubby?

Alpine

It looks like a pretty nice streamlined product that has the ability to add a backup cam etc.

http://pisces.bbystatic.com/image2/B...anvasWidth=642

Any input would be appreciated!

Cheers,

I just bought one of these. I haven’t had a chance to install it yet, been away on business. I currently have the factory NAV system and will be deleting it and installing the iLX-007 in the cubby area where the factory NAV screen goes since the IlX-007 is only 3” thick. I should be doing the install around the end of June or early July. Keep an eye open on this section of the forum because I will be posting about it because of the place I plan on mounting it.

Awesome look forward to seeing your review.

:tup:

IMO I wouldn't put money towards an Alpine system. Their features a lacking and the software they use is dated when compared to other aftermarket mfgs at similar price points.

I'd be all over this one.... if it had Bluetooth

Their CarPlay is supposed to be much less buggy than others though.

I think you missed the point of this hu. It is meant to be streamlined.

I thought the lack of Bluetooth would be con but I realized I always have my phone plugged in so having to plug it in vice using Bluetooth is a non-issue for me.

I came to the same conclusion until I remembered that I wanted to run DashCommand on it, which needs a Bluetooth dongle in the OBDII port.

Ended up ordering Pioneer SPH-DA120 instead. If that was a good move or not is yet to be determined however.

Wouldn't the OBDII Bluetooth dongle be talking to your phone, not the head unit? Apps that can be run via CarPlay (like DashCommand) are being run on the phone not the head unit. I remember seeing an iLX-007 review where the guy reviewing it was using DashCommand. Well, I have an OBDII Bluetooth dongle and use DashCommand so I guess we'll find out after I install mine. :tup:

I'm tempted to agree with that. Not sure if I was over or underthinking the Bluetooth problem. It does make sense. I already order the da120 yesterday, so if you confirm DashCommand works I can always out the da120 in the DD and grab the ILX.

All I could find for a reference was this thread on Palmer who I think makes DashCommand.

dahcommand

It is a year old post so perhaps things have changed. I'm tempted to grab an Ilx 007 on my way home and give it a try.. though it doesn't sound terribly hopeful

Subbing this. I'm looking forward to your reviews as its something to consider when comparing this new Alpine unit and the new Kenwoods coming out

Grabbed the 007, not least of all because they gave me a smoking price. And have two weeks to play with it and if I can't get dash command to work can bring it back.

The rest of my components should arrive over the next week so should be plenty of time.

Fingers crossed...

Palmer Performance does offer OBDII adapters that function over wifi and usb so maybe that's the ticket - albeit a more expensive option than a standard elm327. Though I seem to recall the 007 only has one rear usb input. Maybe the head unit will grab my phones wifi and can use it that way. Somehow I'd expect a bit more information on this or CarPlay on DashCommand website if any of this were actually doable though.

Fingers still crossed...

Awesome keep us updated and post some pictures once its installed.

Got the deck and a wifi OBDII dongle just waiting for the harness adapter to show up then I'll give it a go.

Also have en route a Pioneer SPH-DA120 which is basically their equivelant to the 007. I know that one will work so it is the backup plan. Only has a 6.2" screen though. I much prefer the alpine but if it can't run dash command that's a deal breaker for me.
http://www.pioneer-car.eu/eur/sites/...e_front_a1.jpg

I emailed Palmer to see if they had any advise on getting the app to work. Will share the response

Well I did some digging and it looks like I was mistaken about that review. I can't find the review but all the info I can find says DashCommand does not work on Apple CarPlay. I found a post on Palmer's forum that states that Apple CarPlay is an invite only app system. Palmer wants to make DashCommand CarPlay capable but Apple hasn't invited them yet. :ugh2:

The only ever so slight chance of hope for it to work is through wifi.

I did find out that the Ilx-007 DOES have a Bluetooth chip and antenna in it, but is UN-activated until some unforeseen future iOS/CarPlay update. :mad:

That's just a rumor. For what I have read that has not been confirmed yet.

I saw a photo of an open 007 case and the chip was right there front and center.

In any case, with no workaround for DashCommand the 007 is unfortunately out,many the DA120 is going in.

I was looking at that one as well, keep us updated in here with that install if you don't mind. I wouldn't mind seeing a review. It really is strange that the 007 doesn't have bluetooth, would be interesting if it is installed but not activated, but seems strange that they would need to wait.

Alpine ILX-007
 

I installed ine-w960

http://uploads.tapatalk-cdn.com/2016...a813915f8f.jpg
http://uploads.tapatalk-cdn.com/2016...31ce61c25d.jpg
http://uploads.tapatalk-cdn.com/2016...5545690944.jpg

I have the ine-w940 in my subbie for over 3 years love the features of these units with Bluetooth, navi, backup cams, and DVD playback they work great with iPhones.

The customization with audio is also very nice you can control every speaker and customize the sound to your car.

This unit is a lot cheaper than the one you are looking at I purchased mine from Amazon

Looks like Kenwood also has a similar model in the mix that does feature bluetooth as well. I am liking these new OEM look interfaces that are very sleek.

Ugh, Alpine. I try to like them...

IMO, they just can't keep up with Kenwood or Pioneer. Personally, I'll most likely be picking up the Kenwood DNX-893S. Previously had a DNX7120 before I left the US.

I do like the Alpine unit's appearance the best, but it does lack the functionality that the pioneer and kenwood units have.

I just finished installing my iLX-007 yesterday. Like it so far. I did install mine in the cubby area like the factory nav screen. I'll do a more in depth review after I have spent more time with it.

Here is a quick look at the cubby install. It is a wok in progress. A couple of things need to be fabricated to cover up the gaps. At the moment I'm concerned with functionality. I'll pretty it up later.
Before:

Looks like it's going to be nice. What are the two little screens? And what will you use to fill in the gap?

:tiphat:

I'm exploring doing either fiber glass or carbon fiber. Still looking around for alternatives. One friend suggested I make something out of wood and then use that as a mold for what ever material I choose to use.

The two smaller screens are controllers for some after market bits. The bottom one is my Tien EDFC Active controller. It controls the stiffness of my coilovers. The top one is my Racelogic traction control controller. I could sit here and talk awhile about Racelogic but it would be a little off topic. Let just say my VDC is only on when I forget to turn it off. There are some good threads on this forum explaining Racelogic. :tup:

http://www.the370z.com/group-buys/94...-part-2-a.html

Sweet thanks for the info I will look into them!

I would try the wood as well and than use that as the template to make what your are going for can't wait to see the finished product.

I love custom work I'm planning a custom shallow mount sub behind my seat into the plastic back there with a small amp and fan for it back there as well