Originally Posted by Tree70Z (Post 3328865)

I just wanted to give an update on some changes I made to this system. I decided to add a subwoofer and wanted to go with a compact passive enclosure since I did not see any active enclosures that looked worthwhile. Rather than add a second amplifier, I decided to swap out the the 2-channel Focal 200W for a 5-channel Soundstream 640W Picasso Nano. The Nano can run four channels at 60W RMS each with 200W going to the sub, or 2-channels bridged at 160W RMS with 350W going to the sub. I'm only running front speakers, but I initially hooked it up non-bridged at 60W, thinking I might try bridging it if needed. It is not needed. Even though the Focal was supposedly sending 60W RMS, same as the Soundstream, the new amp sounds much better, and I have to keep the gain turned way down.

So far, just changing the amp was a big improvement. With the Sounstream amp, my speakers were already putting out more bass than they had been with the Focal amp and the music seemed to breathe better. But, I needed to feel it a little more. So, I added a JL Audio CP108LG-W3v3 8" ported micro-subwoofer enclosure. Again, I have to keep the gain dialed way back and have the bass boost turned all the way down. That thing makes WAY more bass than I'll ever need. If I turn it too high, it vibrates my brain. By adding the sub, I was able to enable high pass filter, taking the bass out of the front components which made them sound louder and more crisp and clear.

Before, I was just reasonably happy with my amp and speakers. Now, I love my system and I keep wasting time just sitting in my car and listening to tunes.

Conclusion 1: Focal Solid2 Black amplifier sucks compared to the Soundstream Picasso Nano 640W

Conclusion 2: The JL Audio CP108LG-W3v3 8" ported micro-subwoofer enclosure kicks *** and is more than enough bass for a Z.

Originally Posted by DeliriousClam (Post 3323141)

Damn nice job dude but jesus I could not deal with that glare on the screen

Originally Posted by smokinsound (Post 3470016)

Okay, I've got the 8200NEX and idatalink Maestro installed. I get basic monitoring functions over things like A/F ratio, RPM, speed, engine load, water & exhaust temp (I didn't see oil temp), etc. Added bonuses are 0-60 & 1/4 mile times. I do not get tire pressure monitoring or climate controls. Basically a few extra gauges, but no additional controls, or tire pressure monitoring, which I was hoping for -- but certainly isn't a deal breaker. All steering wheel controls have been retained, and I can activate google voice by pushing and holding the call button. If I push and hold the call end button, the gauge clusters come up on the screen (user customizable when programming the unit.) Be sure to disconnect the harness to the OEM bluetooth module when you install your new unit. Hope this helps for anyone else considering this mod.

Installed on 2013 Nismo w/ bluetooth, no nav.

Originally Posted by LifeOfaZ (Post 3475077)

I want to install the AVIC-8200NEX as well to my 2013 sport, did you need a dash kit for it ?

Originally Posted by bigaudiofanat (Post 3472554)

So I have to ask, did you set your crossovers properly on the focal amp? Never heard of an issue with the focal amps.

Originally Posted by smokinsound (Post 3478732)

Yes, you'll need a dash kit for any of the AVIC series double dins.