Nissan 370Z Forum - Aftermarket Alarm Features with Factory "Alarm"??

Page 3 of 3

Show 40 post(s) from this thread on one page

Nissan 370Z Forum (http://www.the370z.com/)

- Audio & Video (http://www.the370z.com/audio-video/)

- - Aftermarket Alarm Features with Factory "Alarm"?? (http://www.the370z.com/audio-video/10557-aftermarket-alarm-features-factory-alarm.html)

370zproject

11-16-2010 12:17 PM

Quote:

Originally Posted by zero610 (Post 811531)

Yes - when one of the added sensors (tilt, shock, glass break) are set off, it activates the stock alarm.

There is no aftermarket alarm (only aftermarket components to the factory alarm) and hence factory key fob.

is there a link to the info? can u still use the door switch
?

zero610

11-17-2010 08:14 AM

There is a link to the setup earlier in the thread. It is from a Maxima forum. I think you probably have to register there as well. However, that is what I followed. Works the same in our cars.

And yes, the button on the door still works.

chops

12-05-2010 04:28 PM

thanks for the information and links guys. just ordered some sensors!

heres the diagram from the maxima forum so you dont have to register. basically, all you need is to buy a simple relay from kragen/autozone and tap the wires that vipor provided above from the BCM

http://img651.imageshack.us/img651/6121/alarm2.jpg

BenZ	12-10-2010 01:40 PM

If I wire an extra siren to the factory alarm will it make a continuous sound or will it pulse like the factory horn?? How do I wire it so it would make a continuous sound?

Banjo Brian

12-10-2010 06:05 PM

Just had an alarm fitted it has a glass break sensor also a perimeter detection so if anyone just looks in the car it gives a warning beep. If someone tries to break in it also sends me a warning text to my mobile phone or if anyone bangs the car it also sends me an alarm activation warning on my mobile. It works with a sim card fitted in the alarm so i can also track wherever the car is. The alarm make is a Toad.

Brian

370zproject

12-11-2010 02:18 AM

Quote:

Originally Posted by Banjo Brian (Post 846620)

:tiphat:

370zFORme!!

12-30-2010 01:01 AM

Quote:

Originally Posted by zero610 (Post 811531)

So I can purchase these 3 sensors you have listed and have a professional install it on my factory alarm correct?

chops

12-30-2010 01:37 AM

Quote:

Originally Posted by 370zFORme!! (Post 872091)

So I can purchase these 3 sensors you have listed and have a professional install it on my factory alarm correct?

yep...although you could always do it yourself. its pretty simple with the diagrams/pictures posted above. the sensors really just send a pulse telling the stock alarm that one of the doors was opened (which triggers the stock alarm).

370zproject

12-30-2010 06:23 AM

and the door button disables it?

chops

12-30-2010 10:25 AM

Quote:

Originally Posted by 370zproject (Post 872318)

and the door button disables it?

correct you are. the relay in the picture that i snipped from the maxima forum above does most of it:

Quote:

Originally Posted by Maxima Forum

The relay is used to shut down the sensors when the key is turned on to avoid the info screen displaying that the trunk is open while driving. The timer is used to temporaialy disable the sensors while exiting the car. Without the timer you would not be able to immedialy lock the doors and put the factory alarm in "pre-arm" due to the shock sensor sending a gound pulse to the trunk switch. It would cancel the "pre-arm" because it would sense the trunk was open and the alarm would never fully arm. If you wanted to wait about 10 seconds after the last door was shut everytime then the timer wouldn't be required.

370zproject

01-03-2011 09:45 PM

hmmm

6MT-Z34

04-08-2014 08:55 PM

Sorry to revive an old thread but has anybody else done this? and to the people that have done it have you had any problems with any electrical components on your car?

Navster

03-06-2015 10:04 PM

Quote:

Originally Posted by flashburn (Post 253151)

This is something I've been wondering too.

I went and had a glass and shock sensor installed on my factory alarm took 2 hrs.
It's doable

bigaudiofanat

03-07-2015 07:32 AM

They now make a direct plug and play kit for select nissans allowing aftermarket alarms and aftermarket remote starts. Usually these are through Direct (viper) and usually take about an hour by the time you install and program everything to do.

Navster

03-07-2015 06:50 PM

Is there an obd that you can plug in that sends sms messages to a preprogrammed # when car alarm goes off?

All times are GMT -5. The time now is 09:02 AM.

Page 3 of 3

Show 40 post(s) from this thread on one page